Collection: Our Work

Early Honda CB750 motorcycle gas tank. Customer requested us to strip the outside of the gas tank and nothing else. For this process we used a combination of dry and wet blasting to strip the tank down to bare metal.

1957 VW Beetle gas tank. Originally the customer requested to ONLY have the inside tumbled and all the rust removed. After tumbling the gas tank and removing all the rust inside. Some pin holes were revealed which is typical for a gas tank in this condition. Customer opted to have the gas tank li...

Harley Davidson Panhead gas tank. Customer requested us to clean the inside and outside of the gas tank. Remove all the rust and take it down to bare metal. We Tumbled the inside a total of 5 sessions to get the inside to look like the outside. For the outside we used our wet blasting cabinets...

1970 Chevrolet Van gas tank sending unit. This is an excellent before and after example of what we can offer with our wet blasting cabinets. We were able to strip away all the dirt and rust without hurting the fuel sending unit. This can not be done with conventional dry sand blasting cabinet....

Rare 1980 Fiat Campagnola gas tank. Customer requested us to strip the outside, tumble the inside and install permanent epoxy liner. This gas tank had some areas that were rusted through. We stripped the tank down to bare metal inside and out. Last, we installed a permanent two part epoxy liner. ...

1970 Chevrolet Van gas tank. Customer had problems with rust clogging the carburetor. We tumbled the inside of the gas tank removing all the rust and wet blasted his fuel sending unit. You can see before and after pictures of the fuel sending unit in our portfolio of pictures. Once the inside ...

Harley Davidson Panhead gas tank. Customer requested us to clean the inside and outside of the gas tank. Remove all the rust and take it down to bare metal. We Tumbled the inside a total of 5 sessions to get the inside to look like the outside....

1975 Honda Z50 pit bike gas tank. This is a gas tank we purchased with the intentions of demonstrating what we can do. Follow along as we detail each step that goes into restoring this gas tank. Everything from stripping the tank, removing the rust inside and out, repairing the holes, installi...

Aftermarket Sportster style gas tank. Aside from the surface rust. Gas tank was in sound condition. We stripped the outside using a combination of dry and wet blasting. For the inside. We tumbled the gas tank with a combination of stainless steel and silicon carbide to remove all the rust. Aft...

Early 1956 Harley Davidson Panhead Oil Tank. Customer requested us to strip the outside of the gas tank, tumble the inside and install permanent epoxy liner. Here are the pictures before and after stripping the outside. This oil tank was wet blasted using a combination of aluminum oxide and ro...

1975 Triumph TR5T gas tank. Customer asked for us to strip the outside of the gas tank before going to be polished and painted. Motorcycle is being restored to factory new condition. We look forward to seeing it after its be restored.

Here are the pictures before and after we stripped t...

2007 Harley Davidson softail gas tank. This customer needed the works. Strip the outside. Tumble, clean, liner installation. Last was paint and primer. We will make separate post for all the various service that were done to this gas tank. 

Here are the before and after strippi...

Early Honda CB750 motorcycle gas tank. This gas tank is getting the works. Everything from stripping the outside down to bare clean metal. Cleaning out the inside and removing all the rust internally. Preparing the inside of the gas tank for ep...